6 Ways to Keep your Wireless Network Secure
The following tips are some simple steps everyone should take to secure your wifi home broadband router(Mi router in this case). For other routers, you can refer the manuals.
To set up and manage a router you’ll need to gain access to the admin controls.
1. Get strong Router Admin username and password
This is usually done by navigating to an IP address in a web browser (for example https://192.168.1.1), then entering a password. The steps vary for each model(in my case it’s 192.168.31.1). Instructions are available in the manual of the device manufacturer. Password must be complex, long(more than 8 characters) and strong consisting of alphabets (uppercase as well as lowercase), numbers, special character etc. It is good practice to change your WiFi password every couple of months to secure your WiFi.
2. Change your network name (SSID)
It is important to change your network’s default SSID name as it can give some details of your internet provider and type of modem/router. Even if it does not explicitly say your provider in the network name, many providers tend to use their default credentials.
3. Update your modem/router software/firmware if available.
Many of us use a WiFi router that’s a few years old. It becomes very easy to forget about your working router. If you forget to update its firmware and perform overall maintenance on your network. As WiFi and internet technology is changing and upgrading over time, hackers and cybercriminals also keep ongoingly updated and always search for the weak links.
4. Monitor Devices connected to Your Network
You can very easily monitor the mac address of the devices that are connected with your router. You can see total 04 devices are connected in the above picture. If you notice an unknown device (unknown mac address) connected with your network you can permanently block that device. You can permanently block any particular mac address (or device) to access your wifi. In the above picture, you can see the internet access radio button against each connected devices.
5. Select the right wireless security protocol.
There are two types of encryption standards that you can select from depending on the needs of your wireless network:
-WEP (Wired Equivalent Privacy): This is the very basic wireless encryption standard. Only consider using this standard if you use older devices. But I recommend not to use this standard.
-WPA/WPA2 (Wireless Protected Access 2): Although WPA and WPA2 were once two different wireless protocol standards, nowadays, they are usually associated together. WPA/WPA2 or just WPA2 is the most secure wireless security protocol. However, its main drawback is that it cannot be securely paired with technology manufactured before 2006.
You must have heard about a recent flaw in WiFi security called Krack Wifi bug. This bug was related to wireless security protocol (WPA/WEP/WPA2). For more details about krack wifi bug, you can go through this article.
6. Never disable Firewall
Nowadays most the routers are having firewall settings. Never disable firewall to get some extra access. You will always be a loser if you disable it.
Besides the above tips, you also need to follow some basic tips for browsing the internet safely. If possible go for a wired internet connection rather then using WiFi. Because nowadays major vulnerabilities are available for WiFi. You must have heard about IoT (INTERNET OF THINGS). A simple ESP 8266 can very easily jam all the WiFi signals in your area or locality. So, you can see there are many ways available to hamper your WiFi connection. So my advice is to use a wired internet connection. After going through this serious article lets have fun with some funny Wifi names (SSID).
Looking to get new routers here is the link-